Is your washing machine not finishing cycle?
If you’ve ever had a washing machine that won’t finish its cycle, you know how frustrating it can be. There are few things more annoying than starting a load of laundry only to have it stop midway through the cycle.
Fortunately, there are a few things you can do to troubleshoot and repair your washing machine.
One of the most common causes of a washing machine not finishing its cycle is a malfunctioning lid switch.
If the switch is faulty, the machine may fill up and tumble, but it won’t spin. Another possible cause is a broken timer or failed water-level pressure switch.
On a vertical modular (VMW) top-load washer, a bad shifter assembly or a failed drain pump can also stop the washer mid-cycle. Excessive suds can also cause this type of washer to stop before the cycle finishes.
If you’re experiencing this problem, don’t worry. There are several things you can do to troubleshoot and repair your washing machine.
In this article, we’ll take a look at some of the possible causes of a washing machine not finishing its cycle and provide you with some tips on how to fix it.
Key Takeaways
- A malfunctioning lid switch is one of the most common causes of a washing machine not finishing its cycle.
- Other possible causes include a broken timer, failed water-level pressure switch, bad shifter assembly, failed drain pump, or excessive suds.
- Troubleshooting and repairing your washing machine can save you time and money in the long run.
Possible Causes Of Washing Machine Not Finishing Cycle
If your washing machine is not finishing its cycle, there could be several reasons why. In this section, we will discuss some of the possible causes of this problem.
By identifying the cause of the issue, you can take the necessary steps to fix it and get your washing machine back to full working order.
Faulty Timer
A faulty timer can cause your washing machine to stop mid-cycle or not finish its cycle at all.
The timer is responsible for controlling the various stages of the wash cycle, from filling the machine with water to spinning the clothes at the end of the cycle.
If the timer is broken, the machine may get stuck in one stage, or it may not start at all.
Clogged Drain Hose
A clogged drain hose can also cause your washing machine to stop mid-cycle. The drain hose is responsible for removing the water from the machine at the end of the cycle.
If the hose is clogged, the water cannot flow out of the machine, causing it to stop. To fix this issue, you can check the drain hose for any blockages and remove them.
Unbalanced Load
An unbalanced load can cause your washing machine to stop mid-cycle or not finish its cycle at all. If the clothes in the machine are not distributed evenly, the machine may become unbalanced and stop.
To fix this issue, you can redistribute the clothes in the machine to ensure that they are evenly distributed.
Faulty Lid Switch
A faulty lid switch can also cause your washing machine to stop mid-cycle. The lid switch is responsible for detecting whether the lid of the machine is open or closed.
If the switch is faulty, the machine may stop mid-cycle or not start at all. To fix this issue, you can test the switch and replace it if necessary.
Water Level Too Low
If the water level in your washing machine is too low, it may not finish its cycle. The machine needs a certain amount of water to complete the wash cycle, and if the water level is too low, it may stop.
To fix this issue, you can check the water level and adjust it if necessary.
Faulty Control Board
A faulty control board can cause your washing machine to stop mid-cycle or not finish its cycle at all.
The control board is responsible for controlling the various functions of the machine, and if it is faulty, the machine may not work correctly.
To fix this issue, you can test the control board and replace it if necessary.
How To Troubleshoot And Repair A Washing Machine That Won’t Finish Its Cycle
If your washing machine stops mid-cycle and won’t finish, it can be frustrating. But don’t worry, you can troubleshoot and repair the issue yourself without calling a technician.
In this section, we will guide you through the steps you can take to fix your washing machine.
Check The Drainage System
The first thing to check is the drainage system. Inspect the drain hose for any clogs or kinks that may be preventing water from draining properly.
If the drain hose is clear, check the drain pump for any debris or foreign objects that may be blocking it. You can also check the drain pump for continuity using a multimeter. If the drain pump is faulty, you will need to replace it.
Inspect The Drain Pump
If the drain pump is not the issue, check the spin cycle. An unbalanced load can cause the washing machine to stop mid-cycle.
If the load is unbalanced, redistribute the clothes in the drum and restart the cycle. If the spin cycle is not the issue, check the water level.
The water level could be low, resulting in the washing machine stopping mid-cycle. Adjust the water level to the appropriate level and restart the cycle.
Check The Spin Cycle
If the spin cycle is not the issue, check the control board. A faulty control board can cause the washing machine to stop mid-cycle.
Check for any error codes or flashing lights on the control board. If there are any error codes, consult the user manual for troubleshooting steps. If the control board is faulty, you will need to replace it.
Inspect The Water Level
If the water level is not the issue, check the lid switch. A faulty lid switch can cause the washing machine to stop mid-cycle.
Check the lid switch for any faulty connections or broken parts. If the lid switch is faulty, you will need to replace it.
Check The Control Board
If all of the above steps fail, you may need to reset the washing machine or replace the washer timer.
To reset the washing machine, unplug it from the power source for a few minutes and then plug it back in. If this does not work, you may need to replace the washer timer.
In conclusion, troubleshooting and repairing a washing machine that won’t finish its cycle can be done by following the above steps.
By doing so, you can avoid costly repairs and get your washing machine back to completing full cycles.
Founder of homeappliancegeek.com, avid cook, and lover of Asian food.
Signature dishes include Thai Red Curry, Chicken Saag, Bibimbap and Sushi.
Massive clean freak; a habit baked-in after spending 9 years in the catering industry.
The one appliance he couldn’t live without? Easily the dishwasher (total relationship saver!).
