How To Reset A Maytag Dishwasher In Just A Few Simple Steps!

Wondering how to reset a Maytag dishwasher? You are in the right place to learn how.

If you’re having trouble with your Maytag dishwasher, resetting it might be just what you need to do.

It can help resolve issues such as control panel problems, blinking lights, and the dishwasher not starting or operating.

One common way to reset your Maytag dishwasher is by disconnecting it from the power source for one minute and then reconnecting it.

If your dishwasher is plugged into an outlet, simply unplug the unit for one minute and then plug it back in.

If it’s hardwired to a power supply or the plug is not easy to access, turn off the breaker for the dishwasher on your home’s electrical panel and turn it back on after one minute.

Another way to reset your Maytag dishwasher is by following a specific sequence of button presses on the control panel.

This method can be useful if you’re experiencing issues such as blinking lights.

We’ll go over this method in more detail later in the article.

Types Of Resets For Maytag Dishwashers

If you are experiencing issues with your Maytag dishwasher, resetting it may be the solution. There are two types of resets that you can perform on your Maytag dishwasher: a soft reset and a hard reset.

Soft Reset

A soft reset is the easiest and quickest way to reset your Maytag dishwasher. This type of reset is useful when your dishwasher is not responding properly or if it is displaying an error code.

Here are the steps to perform a soft reset:

Open the dishwasher door and locate the control panel.
Press the “Start/Resume” button and hold it for about 3 seconds.
Release the button and wait for a few seconds.
Close the dishwasher door and wait for the dishwasher to start.

If the soft reset does not solve the problem, you can try performing a hard reset.

Hard Reset

A hard reset is a more drastic measure that should only be performed if the soft reset does not work.

This type of reset will erase all of the settings and preferences on your dishwasher, so be sure to take note of any important settings before performing a hard reset.

Here are the steps to perform a hard reset:

Turn off the dishwasher’s circuit breaker or unplug it from the power source.
Wait for 5 minutes.
Turn on the circuit breaker or plug the dishwasher back in.
Open the dishwasher door and locate the control panel.
Press the “High Temp” and “Start/Resume” buttons at the same time and hold them for about 3 seconds.
Release the buttons and wait for a few seconds.
Close the dishwasher door and wait for the dishwasher to start.

If the hard reset does not solve the problem, you may need to contact a professional for assistance.

Resetting Your Maytag Dishwasher

If you are experiencing control panel issues with your Maytag dishwasher, resetting it may help resolve the problem. Here are the steps to follow:

Turning Off The Power

The first step is to turn off the power to the dishwasher. You can do this by unplugging the appliance from the outlet or by turning off the appropriate breaker. Wait for one minute before proceeding to the next step.

Pressing The Reset Button

After turning off the power, locate the reset button on the dishwasher’s control panel. Press and hold the button for a few seconds until the lights on the panel turn off.

Release the button and wait for a few seconds before turning the power back on.

If your dishwasher does not have a reset button, you can still reset it by disconnecting it from the power source for one minute and then plugging it back in.

Once you have completed these steps, turn the power back on and test the dishwasher to see if the control panel issues have been resolved.

Checking For Simple Fixes

If your Maytag dishwasher is not working properly, there may be some simple fixes that you can try before resorting to resetting the control panel. Here are some steps you can take:

Inspecting The Power Supply

The first thing you should do is check the power supply to your dishwasher. Make sure that it is properly plugged in and that the outlet is working.

You can test the outlet by plugging in another appliance or device. Assuming the outlet is not working, you may need to reset the circuit breaker or replace the outlet.

If the power supply is not the issue, check the dishwasher’s power cord for any damage or frayed wires. If you find any damage, you will need to replace the power cord before using the dishwasher again.

Checking The Door Latch

If your dishwasher is not starting, it may be due to an issue with the door latch. Make sure that the door is fully closed and latched.

If the door is not closed properly, the dishwasher will not start. You should also check the door latch for any damage or debris that may be preventing it from closing properly.

If you find any damage or debris, clean or replace the door latch as necessary.

Additionally, check the dishwasher’s float switch to make sure it is not stuck. The float switch is located at the bottom of the dishwasher tub and helps to regulate the water level.

If the switch is stuck in the up position, the dishwasher will not start. You can try gently moving the switch up and down to see if it is stuck. If it is, clean or replace the switch as necessary.

By following these simple steps, you may be able to fix your Maytag dishwasher without having to reset the control panel.

Final Checks On Your Maytag Dishwasher

After resetting your Maytag dishwasher, there are a few final checks you can perform to ensure that the issue has been resolved.

Running A Test Cycle

To check if your dishwasher is functioning properly, you can run a test cycle. Here are the steps to follow:

Ensure that the dishwasher is empty and the spray arms can move freely.
Close the dishwasher door and select the “Normal” wash cycle.
Press the “Start” button and wait for the dishwasher to start running.
Listen for any unusual noises or vibrations during the cycle.
After the cycle is complete, check if the dishes are clean and dry.

If the dishwasher runs smoothly and the dishes are clean and dry, then the issue has been resolved.

Contacting A Professional

If the issue persists even after resetting the dishwasher and running a test cycle, it may be time to contact a professional.

A certified technician can diagnose and fix any underlying issues with your dishwasher.

You can contact Maytag customer support to schedule a service appointment or find a local repair professional.

Make sure to provide them with the model and serial number of your dishwasher, as well as a detailed description of the issue.

Related Articles:

Steve

Founder of homeappliancegeek.com, avid cook, and lover of Asian food.

Signature dishes include Thai Red Curry, Chicken Saag, Bibimbap and Sushi.

Massive clean freak; a habit baked-in after spending 9 years in the catering industry.

The one appliance he couldn’t live without? Easily the dishwasher (total relationship saver!).