Washing Machine Lights Flashing (What To Do)

are your washing Machine lights flashing?

If you’ve ever been in the middle of a laundry cycle only to notice that your washing machine’s lights are flashing, you’re not alone.

While it can be frustrating to deal with, flashing lights on washing machines are a common occurrence and can be indicative of a range of issues.

The good news is that many of these issues can be resolved with a few simple troubleshooting steps.

Troubleshooting washing machine lights flashing can be a simple process, but it’s important to know what you’re looking for.

In some cases, flashing lights may be caused by a minor issue, such as an unbalanced load or a blocked drain.

In other cases, however, flashing lights may be indicative of a more serious problem that requires professional repairs.

By understanding the common causes of flashing lights on washing machines, you can better diagnose the issue and determine the best course of action.

Key Takeaways

• Troubleshooting washing machine lights flashing can help you determine the cause of the issue.
• Common causes of flashing lights on washing machines include unbalanced loads, blocked drains, and more serious mechanical issues.
• Knowing when to call for professional repairs can help prevent further damage to your washing machine.

Troubleshooting Washing Machine Lights Flashing

If your washing machine’s lights are flashing, it can be frustrating and confusing. However, there are a few things you can do to troubleshoot the problem and get your machine working again.

Check Power Supply

The first thing you should do is check the power supply. Make sure the machine is plugged in and that the circuit breaker hasn’t tripped.

If the machine is on the same circuit as other high-power appliances, such as a dryer or air conditioner, it may be drawing too much electricity and causing the lights to flash.

If this is the case, try unplugging some of the other appliances and see if that solves the problem.

Inspect Control Panel

The control panel is the interface between you and your washing machine, and it can sometimes be the source of the problem.

Check to see if any of the buttons are stuck or twisted, and make sure the control panel is clean and free of lint. If the control panel is damaged or malfunctioning, it may need to be replaced.

Diagnose Faulty Sensor

If the power supply and control panel are both functioning properly, the problem may be a faulty sensor.

Sensors are responsible for detecting things like water level, temperature, and load size, and if they’re not working correctly, it can cause the lights to flash.

You may need to contact support or a repair technician to diagnose and fix the problem.

Reset Control Board

If all else fails, you can try resetting the control board. To do this, unplug the machine and wait for a few minutes before plugging it back in.

You can also try lifting and closing the lid six times within 12 seconds to reset the unit. This may help clear any error codes and get the machine working again.

Regular maintenance can help prevent problems with your washing machine, but if you do encounter issues with flashing lights or other error codes, don’t hesitate to contact us for support.

We’re here to help you get your machine back up and running as quickly as possible.

Common Causes Of Flashing Lights On Washing Machines

If you notice that the lights on your washing machine are flashing, it could be an indication of a problem with the appliance.

Here are some of the most common causes of flashing lights on washing machines, and what you can do to fix them.

Water Inlet Valve Issues

One of the most common reasons for flashing lights on a washing machine is a problem with the water inlet valve.

This valve is responsible for controlling the flow of water into the machine, and if it becomes faulty, it can cause the lights to flash.

A faulty water inlet valve can prevent the machine from filling up with water, or cause it to overfill.

To fix this issue, you will need to replace the water inlet valve. This is a relatively simple process that involves disconnecting the old valve and connecting the new one.

Make sure to turn off the power and water supply to the machine before you begin.

Faulty Drive Belt

Another common cause of flashing lights on a washing machine is a faulty drive belt. The drive belt is responsible for turning the drum of the machine, and if it becomes damaged or worn, it can cause the lights to flash.

A faulty drive belt can also cause the machine to make strange noises or not spin properly.

To fix this issue, you will need to replace the drive belt. This is a slightly more complicated process than replacing the water inlet valve, but it can still be done with a little bit of DIY knowledge.

Make sure to consult your washing machine’s manual before you begin.

Lid Switch Malfunction

The lid switch is another component of a washing machine that can cause the lights to flash if it becomes faulty.

The lid switch is responsible for detecting whether the lid of the machine is open or closed, and if it becomes damaged or worn, it can cause the lights to flash.

To fix this issue, you will need to replace the lid switch. This is a relatively simple process that involves disconnecting the old switch and connecting the new one.

Make sure to turn off the power to the machine before you begin.

How To Fix Flashing Lights On Washing Machines

If you are experiencing flashing lights on your washing machine, it can be a sign of a problem with the appliance.

Here are some steps you can take to fix the issue:

Inspect And Clean Inlet Hoses

One of the most common reasons for flashing lights on a washing machine is a blockage in the inlet hoses. To fix this issue, you need to inspect the hoses for any blockages or kinks.

If you find any blockages, you can clean them out using a soft-bristled brush or a cloth. You can also replace the hoses if they are damaged or worn out.

Check For Twisted Or Damaged Drain Hose

Another reason for flashing lights on a washing machine is a twisted or damaged drain hose. To fix this issue, you need to inspect the drain hose for any twists or kinks.

If you find any, you can straighten them out to allow the water to flow freely. You can also replace the drain hose if it is damaged or worn out.

Inspect And Replace Faulty Pump

If the inlet and drain hoses are not the issue, the flashing lights could be a sign of a faulty pump. To fix this issue, you need to inspect the pump for any signs of damage or wear.

If you find any, you can replace the pump with a new one. Make sure to follow the manufacturer’s instructions when replacing the pump.

Replace Faulty Temperature Sensor

If the above steps do not fix the issue, the flashing lights could be a sign of a faulty temperature sensor. To fix this issue, you need to inspect the temperature sensor for any signs of damage or wear.

If you find any, you can replace the temperature sensor with a new one. Make sure to follow the manufacturer’s instructions when replacing the temperature sensor.

By following these steps, you can troubleshoot and fix the issue of flashing lights on your washing machine.

Remember to always follow the manufacturer’s instructions and take safety precautions when working with electrical appliances.

When To Call For Professional Repairs

If you have noticed flashing lights on your washing machine, it could be a sign of a problem that needs professional attention.

While some issues can be resolved with basic troubleshooting, certain problems require the expertise of a professional repair technician.

Here are some situations where you should consider calling for professional repairs:

All Lights Flashing

If all the lights on your washing machine are flashing, it could be a sign of a serious problem that needs immediate attention.

This could indicate that the machine is completely messed up and requires professional repairs. You should contact a professional repair technician as soon as possible to diagnose and fix the problem.

Wash And Rinse Lights Flashing

If you see the wash and rinse lights flashing two times, it could be a sign of a problem with your Speed Queen washer. This is a common issue that many people face, and it often requires professional repairs.

You can try basic troubleshooting techniques, but if the problem persists, you should contact a professional repair technician.

Other Lights Flashing

If you notice other lights flashing on your washing machine, such as the rinse, spin, full, or sensing lights, it could indicate a blockage in the drain/waste pipe or the filter.

You can consult the manual that came with your washer to locate these areas and try to clear the blockage. If the problem persists, you should contact a professional repair technician.

Strange Noises Or Vibrations

If your washing machine is making strange noises or vibrating excessively, it could be a sign of a problem that needs professional attention.

This could indicate a problem with the motor, drum, or other internal components of the machine. You should contact a professional repair technician to diagnose and fix the problem.

In conclusion, if you notice any flashing lights or other issues with your washing machine, it is important to address them promptly to avoid further damage.

While basic troubleshooting can sometimes resolve the issue, certain problems require the expertise of a professional repair technician.

Contact us today to schedule an appointment with one of our experienced technicians and get your washing machine back up and running in no time.