How to Fit an Integrated Dishwasher

These days, kitchens are filled with wonderfully designed appliances that make our lives so much easier and our homes clean and beautiful. One of these is an integrated dishwasher. Now, you might be asking yourself what an integrated dishwasher is, so we’ll explain.

An integrated dishwasher is a dishwasher that perfectly blends into your kitchen. It does this by hiding the control panel and matching your kitchen cabinets. It is quite an attractive feature since it makes your cabinet space much more appealing. But how exactly do you fit an integrated dishwasher? Just keep reading as we will cover everything you need to know.

How Much Space Do You Need for an Integrated Dishwasher?

Since the whole point of having an integrated dishwasher is making it blend in with your kitchen, you need to be sure that your integrated dishwasher will fit in the designated spot perfectly. Integrated dishwashers are typically 82cm tall, 55cm deep, and about 60cm wide. This makes them slightly smaller than freestanding dishwashers.

They are also more compact than portable dishwashers. When it comes to taking measurements for your integrated dishwasher, it is vital that you do it correctly to avoid issues with your dishwasher’s size during installation.

Here are a few tips to keep in mind when you are deciding on the spot that you would like your integrated dishwasher to be:

  • There needs to be a water supply close by.
  • Your dishwasher will require a power supply source that should be close enough to your dishwasher so that there isn’t a safety risk in the kitchen.

It is acceptable for your power supply to be up to a meter away when it comes to how close these features need to be. Likewise, your waste pipes and water pipes should not be more than 50cm from your dishwasher. These are crucial elements to keep in mind before you start installing your dishwasher.

Check the Space

Another critical factor to remember is that you will need enough room to open your dishwasher doors entirely without any risk or safety issues. If your dishwasher doors can’t open fully, you will need to rethink the space you have chosen.

Now, how exactly do you measure your kitchen for an integrated dishwasher? If you already have an integrated dishwasher that you are simply replacing with one of the newer dishwasher models, you can measure your old one and see if the newer model matches in size. It is essential to account for at least 3 cm of space behind your integrated dishwasher since the dishwasher hookup takes some space.

In addition, you should be sure to measure three ways: front-to-back, top-to-bottom, and edge-to-edge. Once you have the measurements, you can start looking at your preferred dishwasher manufacturer to find the perfect integrated dishwasher for your kitchen. If this is your first integrated dishwasher, the measurement process will be the same, except using your cabinet space. Also, be sure to add 3cm of backspace for your dishwasher supply pipes.

Is it Easy to Fit an Integrated Dishwasher?

Installing an integrated dishwasher isn’t much more complicated than installing a freestanding dishwasher. However, you do need to take extra care because some added touches and drilling need to be done for hassle-free installation. In addition, you will need the correct power supplies, as well as a reliable power drill. Several companies offer an integrated dishwasher installation service, and some dishwashers come with the service included.

Nevertheless, by installing your integrated dishwasher yourself, you can save a great deal on a dishwasher installation cost. Most integrated dishwashers will come with installation kits and a manual for easy installation.

When you are ready to start the installation process of your integrated dishwasher, you need to switch off your home’s water supply to avoid flooding issues. Since there will still be water in your faucets and pipes after switching off the water, it is best to open your taps and let them run until no more water comes out. Then you can continue.

Be sure to switch off your kitchen’s electrical supply before beginning with your dishwasher installation. By following these ten steps, you will be able to enjoy your integrated dishwasher in no time.

  1. Your hot water supply needs to be connected to the water supply line. If you are tempted to use a cold water tap instead, don’t do it. Hot water is much more effective when cleaning your dishes.
  2. If you would like the option of using cold water, too, you can attach a water inlet connection that will make it possible for your dishwasher to use both cold and hot water when washing. Leave the other end of the valve unattached for now. You will attach the unconnected side later on. If your sink has a tailpiece, secure the drain line to it. If your sink doesn’t have a tailpiece, it will be necessary to install a tailpiece. Then, you can connect the drain pipe.
  3. Next, you can connect the utility lines.
  4. By adjusting your dishwasher’s feet, set the height of your dishwasher. It should be nearly level to your countertop, with a small gap. The gap is needed for ventilation. A ventilation gap will help prevent mold growth and rusting of your dishwasher. It also makes it much easier to move your dishwasher into the space if there is a gap between your dishwasher and your countertop.
  5. Once you are happy with your dishwasher’s height, you can move it under your counter space. If you have an easily damaged kitchen floor, it is better to use a towel or rollers underneath the machine.
  6. Next, you should connect the loose end of your water supply line to your dishwasher. Secure your water hose pipe firmly.
  7. Continue to attach your drain line and secure it to your dishwasher. Make sure that your wastewater pipe has been firmly attached to avoid flooding your kitchen with your first wash.
  8. Complete your wiring by following the colour codes of matching the electrical wires. If you don’t have much experience with electrical wiring and are nervous about this step, many videos are available online that explain electrical wiring very clearly.
  9. In most cases, integrated dishwashers will come with roller slots to secure the appliance to your cabinetry. You can drill holes and complete this part to make your dishwasher similar to built-in dishwashers.
  10. You can turn the water and power supplies on and try your integrated dishwasher for the first time.

Opened modern dishwasher machine with plates and cups on kitchen

How to Fit an Integrated Dishwasher into an Existing Cabinet

Installing an integrated dishwasher into an existing cabinet can be time-consuming but the payoff is worth it. Once you start enjoying your dishwasher, it will be hard to imagine a time before you had it.

For example, suppose you have a space that you want to use for your integrated dishwasher but it is an existing cabinet. In that case, you will first need to check that the cabinet is close enough to the water supply for the dual outlet valve and the drain for the dishwasher drain and the power supply.

Next, you will need to remove any storage or shelving to prevent the dishwasher from fitting into the cabinet. Try to do this as seamlessly as possible without damaging the structure of your cabinet. Once you have cleaned out the space, make sure that it is sufficient enough in size to offer proper water flow to and from your dishwasher.

Next, you can repeat the steps mentioned above to connect your dishwasher to the hot water shutoff valve. Also, attach your dishwasher’s drain pipe so that it can drain water after washing. The last step will be to find the correct height for your dishwasher by adjusting the legs.

Do You Need a Door for an Integrated Dishwasher?

Since the whole point of an integrated dishwasher is to make it blend with your kitchen, it is best to have a door for it. On the other hand, by not having a door, your integrated dishwasher will stand out for what it is and not be camouflaged into your kitchen’s surroundings.

Although having a door for your integrated dishwasher isn’t required, it is recommended for the best look. You don’t need to have a cabinet for your integrated dishwasher; just a door to hide it will be fine.

How Long Does it Take to Install an Integrated Dishwasher?

There are several brands of integrated dishwashers on the market today. But they are all quite similar when it comes to installation. The installation process of an integrated dishwasher takes between two and three hours. That isn’t a long time if you consider how much time and effort your dishwasher is going to save you in the long run.

Conclusion

A dishwasher can make your kitchen experience a delight. Imagine cooking and enjoying your meals without having to worry about cleaning the dishes afterward. By investing in an integrated dishwasher, you get to enjoy all the benefits of a dishwasher without the appearance of one.

Leave a comment